← Back to Downloads

All Micro News No. 67 Listings Disc

Chris Pickles's multicolour screen, Dave Arts's Graphic Arm geometry, Ted Cawkwell's Schizoscrenia and David Williams's Joseph from All Micro Magazine No. 67, typed in and on one bootable Xtal BASIC disc.
Magazine
1993
1.0 (23 October 2026)
397 KB
Last Updated
November 21, 2026
All Micro News No. 67 Listings Disc

About

The programs from All Micro Magazine No. 67, November to December 1993, typed in and on one bootable Xtal BASIC disc.

MULTICOL.COM, Chris Pickles's The Forgotten Screen, switches on the video chip's 64 by 48 multicolour mode, the forgotten screen of his title, and cycles 64 stripes through the colours. It is made from the magazine's hex dump.

GEOM1 and MODEL, Dave Arts's Graphic Arm part 2: GEOM1 works the cosine rule sum at the heart of his home made digitising arm, and MODEL plots every position the arm can reach.

UPSCROLL, SCROLL20.OBJ, SCROTEST and SCHIZO, Ted Cawkwell's Schizoscrenia: a permanent bottom line in BASIC, a machine code routine to scroll screen rows 1 to 20 up one row, a demonstration of it, and three separately scrolling work areas with a permanent bottom line. UPSCROL2 is ours, UPSCROLL corrected so it runs for ever.

JOSEPH, David Williams's five liner, paints sixty ellipses in random colours, a coat of many colours.

The listings were printed on pages 3, 7, 8, 11 and 12 of the magazine, which is on this site as All Micro Magazine No. 67 (November to December 1993). This disc saves you typing them in.

Running Them

Boot the disc and type MULTICOL for the multicolour screen (reset to get out), or type XBAS, then RUN "SCHIZO" or any of the other names. In SCHIZO, | then T, M or B changes area, and Q quits.

What Is in the Download

A zip holding the disc image as a DSK, the same disc as an MFI for MAME to write to, the listings as BASIC text and as tokenised Xtal BASIC, the machine code with the hex as printed, a README with the full account of each program, and the screen captures and MAME scripts used to test them.

Verified

Transcribed from the page images and run on the Einstein in MAME 0.289 with Xtal BASIC 4.2. The seven BASIC programs, loaded into BASIC and saved back, give the same program bytes as our files. Seven run as printed; GEOM1 gives the answers in the article's figures. UPSCROLL stops itself with "Range Error in 35" after 26 lines, and our UPSCROL2 ran 80 lines without stopping. Neither hex dump has a printed checksum: both disassemble completely and run, MULTICOL's video register table decodes to the multicolour mode, and SCROLL20 matches the character column printed beside its dump and a separate reading of the same routine in All Micro Magazine No. 69. Not run on real hardware, and the Graphic Arm itself was not built.

Kept as Printed

Every listing is as printed. Ours are UPSCROL2, a corrected UPSCROLL whose line 35 gains :IF X>24 THEN X=0 so it no longer runs off the end of its 25 line array; the zero bytes padding each machine code file out to a 256 byte page, past the end of the code; and one space in a string in UPSCROLL, inferred where a line wraps on the page. The README lists each.

The programs are their authors', published in All Micro Magazine in 1993.

Gallery

No items found.

Publisher

Steam Computer Society
Read about the publisher ➔
FILE downloads
.ZIP
ZIP Package

Get the Newsletter

New guides, disk images and community finds, every couple of weeks. No spam, we promise, this isn't Tatung's marketing department.
Your subscription could not be saved. Please try again.
Your subscription has been successful.

Newsletter

Subscribe to our newsletter and stay updated.

This form is protected by reCAPTCHA, and the Google Privacy Policy and Terms of Service apply.